BEFORE YOU BEGIN…

The installation of the meter is simple, yet, we recommend that it must be done during the day and by an ELECTRICIAN. You will need a screwdriver. A flashlight can also be helpful! If you have any questions or problems with the installation, do not hesitate to contact us by email: [email protected]

You can refer to technical details of the meter in www.greenant.com.br/fichatecnica Follow the next step only after TURNING OFF THE MAIN SWITCH. If your circuit breaker box does not have a main switch, turn off switch that is right after the utilitie’s energy meter.

If you do not know where to find the main switch we recommend asking your building’s staff about it.

STEP BY STEP INSTALLATION

IMPORTANT: Place the clip respecting the direction of the sticker pasted on it, leaving the home icon to box and the transmission tower icon facing out. If the clips are small for the thickness of the phase cables, please contact via email [email protected] requesting clips suitable to your electrical installation.

NOTE 1: In three-phase installations, use clamps with stickers BLACK, WHITE and RED. In two-phase installations, use only the clamps with the BLACK and WHITE stickers. In single-phase installations, use only the clip with BLACK sticker. To find out how many phases are there in your electric box, check how many cables entering their main switch.

NOTE 2: In three-phase installations, use BLACK, WHITE and RED cables. In two-phase installations, use only BLACK and WHITE cables. In single-phase installations, use only BLACK cable. To find out how many phases are there in your electric box, check how many cables entering their main switch.

N

ALL SET!

Now you can turn on the main circuit breaker. A flashing light on the front of the meter indicates that it is ready to connect to the Wi-Fi network!

NOW IT´S TIME TO CONNECT YOUR METER TO THE INTERNET!

– To do this, you must connect a computer, smart phone or tablet to the Wi-Fi network whose name begins with GreenAnt, which was generated by the meter itself.

– Then access mygreenant.com and fill in the details of your personal Wi-Fi to connect the meter to it. IMPORTANT: If you change the password of your home network or want to replace the network to which your meter connects with another, press the RESET button (which is in the hole at the bottom of the meter) for 5 seconds and go through the Wi-Fi registration process.

– After the connection is successful, the light signal will become constant, indicating that you can now link the meter to your account in GreenAnt using the identifier number that is printed on the instruction manual and on the sticker on the side of your meter. If you do not have a registered account in GreenAnt, click here to create it.